Tire pressure monitor fault

[Redbaron08]

I recently switched out wheels and tires on the car. They are the 2011 GT500 stock wheels and tires. They were on a 2007 GT500 and they correct sensors installed and ran fine. Today was the first day the car has been driven for more than a few minutes. The car freaked out and this message came up. "tire pressure monitor fault." Any ideas on how to fix it or whats wrong?

[HSURB]

No idea, but I'll be interested to see what others post.

HSURB®

[Quagmire]

If I'm understanding you, you have a set of 2011 GT500 wheels with 07-09 TPMS sensors installed on your car.

After you put the wheels on, did you train the sensors to the car? It's easy to do, but you need the training tool for that.

[Birdman]

First thing to do is to check to make sure all tires have the same pressure, if not that's the problem.....add air to get them even then turn off key for a minute then back on again then the light should go off and reset itself as you begin to drive the car.

If all the air is already the same you may have to reprogram the sensors using a programer.