Always looking for more GT500 info, and like to share my experience as well

[captainbob]

Just a quick intro..

[Boston Mike]

Just a quick intro..

Welcome Bob!!!!

[Shlbylvr]

welcome to the site.

[Dad's72Mach]

Howdy!


:pimp:

[Joe G]

:hi:


:imnewhere:

[VaporDude]

:hi:


:imnewhere:

Your about as old as that state that your in and your one of the biggest PW's here. New here....give me a break. :doh2:

Hi Captain.......welcome to the site.

[Gr8snkbite]

welcome aboard bob...we share equally.....enjoy....:grin:

[Johnny Dangerously]

Welcome Bob!

[Birdman]

Welcome to StangsUnited Captainbob !!


Are you the same captainbob from team shelby that lives in Wash state?

[Darkside]

Welcome Bob

[Little Debbie]

Welcome aboard, Cap'n!


:grin:

[King Cobra]

Welcome Captain!

[Gr8snkbite]

Welcome to StangsUnited Captainbob !!


Are you the same captainbob from team shelby that lives in Wash state?

:yes:

[captainbob]

Nice welcome.. Thanks everyone!! What is a PW??

[Gr8snkbite]

Nice welcome.. Thanks everyonje!! What is a PW??

Post Whore...

its what TG does....:giggle:

[Boston Mike]

Nice welcome.. Thanks everyonje!! What is a PW??

Some nice monkey named MrBostonSir told you to stop by, eh? :grin: be interested in Hearing how your buildout is going.

[captainbob]

Yep.. I just heard about this site... Seem like allot of folks moved over here..

[captainbob]

yep.. build is done.. Just getting the KB 3.6 dialed in..

[Boston Mike]

Yep.. I just heard about this site... Seem like allot of folks moved over here..

Glad you listened to me........:shades:


Have you dyno'd the new setup yet?

[captainbob]

yep, with a 4" street set up.. About 900 hp Going to run the 3.75 pulley on Friday at the track.. 775 rwhp
http://i1128.photobucket.com/albums/m482/captainbob360/DynoTVSvsKB36comparegraph.jpg

[CH53Driver]

:wow2: Captainbob is a name I remember from long ago on TS. Guess I haven't been over there in so long I was surprised to see a familiar name pop up. Welcome aboard Captain. :wtg:

[captainbob]

Hey Mr. B, dyno'd 775 rwhp w/ a 4" street pulley.. Should be looking at 825 rwhp with a pulley swap.. Pushing 1000 HP at the crank.. Just can't get enough :salute2:Heading to the track for eliminations this Friday.. Hoping I can break some new personal records with the KB 3.6..

[Joe G]

Your about as old as that state that your in and your one of the biggest PW's here. New here....give me a break. :doh2:

.

:wasntme:


:innocent:

[mustang loco]

yep.. build is done.. Just getting the KB 3.6 dialed in..

Was great thread to follow Captain,Welcome aboard!!:tiphat2:

[Birdman]

yep.. build is done.. Just getting the KB 3.6 dialed in..

Could you give us a little history on your GT500 and bring us up to date with where you are right now with how and why you did what you did?

[ati]

Hi Bob, Welcome

[captainbob]

Good to see some familure names over here.. Dyno'd the new KB at 775rwhp with the mild 4" pulley..Will do a pulley swap this week to a 3.75".. Heading to the track on Friday..
Here s a couple of vids of the new set up.
http://www.youtube.com/watch?v=u10jRTDMNFs Cervini hood
http://www.youtube.com/watch?v=F1zvOfC9X_k 775rwhp

[captainbob]

Sure, I've owned the car since Nov 06. Started with a JLT CAI, pulley and tune.. Gained 100 rwhp. Need more hp..:doh2:
Upgraded to TVS with a lund tune.. 700rwhp, and running high 10's.. Blew up my engine.:moneyman:
Built a forged short block, needed more power again :doh2:
Installed a KB 3.6 2 weeks ago... Running over 800 rwhp.. Will see how much I pick up at the track this Friday..
Broke everything and replaced everything with bullet proof parts..
GT500 mods: Kenne Bell 3.6 Liquid cooled Stage III, 900HP/ 775 RWHP ON 4" PULLEY.. 10% Lower pulley, 80lb. injectors, Dyna tech ceramic coated headers, Dynatech hi flow cats/ X pipe, FRPP Borla exhaust, FRPP 410 gears, 3" Fidenza Chromoly 900hp driveshaft, Detroit Tru track rear end, Pro 5.0 linkage, Moser axles, Afco Pro-series Dual Pass Heat Exchanger, Shelby custom centercaps, BMR LCA, Granatelli tire fryer line locks, QA1 racing shocks, F-P-S short block, CCR H beam rods, Ross pistons, Hellfire rings, ARP 2000 studs, Shelby autographed dash.

[Joe G]

Broke everything and replaced everything with bullet proof parts..

GT500 mods: Shelby autographed dash.


:haha:


I like your sense of humor!

[rickf73]

http://i252.photobucket.com/albums/hh18/rickf73/forums/welcome.gif Bob.

:hi:

[Birdman]

Good to see some familure names over here.. Dyno'd the new KB at 775rwhp with the mild 4" pulley..Will do a pulley swap this week to a 3.75".. Heading to the track on Friday..
Here s a couple of vids of the new set up.
http://www.youtube.com/watch?v=u10jRTDMNFs Cervini hood
http://www.youtube.com/watch?v=F1zvOfC9X_k 775rwhp


Could you give us a little history on your GT500 and bring us up to date with where you are right now with how and why you did what you did?


Sure, I've owned the car since Nov 06. Started with a JLT CAI, pulley and tune.. Gained 100 rwhp. Need more hp..:doh2:
Upgraded to TVS with a lund tune.. 700rwhp, and running high 10's.. Blew up my engine.:moneyman:
Built a forged short block, needed more power again :doh2:
Installed a KB 3.6 2 weeks ago... Running over 800 rwhp.. Will see how much I pick up at the track this Friday..
Broke everything and replaced everything with bullet proof parts..
GT500 mods: Kenne Bell 3.6 Liquid cooled Stage III, 900HP/ 775 RWHP ON 4" PULLEY.. 10% Lower pulley, 80lb. injectors, Dyna tech ceramic coated headers, Dynatech hi flow cats/ X pipe, FRPP Borla exhaust, FRPP 410 gears, 3" Fidenza Chromoly 900hp driveshaft, Detroit Tru track rear end, Pro 5.0 linkage, Moser axles, Afco Pro-series Dual Pass Heat Exchanger, Shelby custom centercaps, BMR LCA, Granatelli tire fryer line locks, QA1 racing shocks, F-P-S short block, CCR H beam rods, Ross pistons, Hellfire rings, ARP 2000 studs, Shelby autographed dash.


Wow a nice new engine build after the unfortunate blown engine CB a lot of good strong parts for sure. I see you now have the 80lb injectors how about your fuel pumps...dual FGT pumps perhaps? More importantly who's tune are you going to be running this time in the new engine? All the best at the track this Friday!!


BTW your car look fantastic with that hood and those wheels ! :wtg:

[mustang loco]

Good to see some familure names over here.. Dyno'd the new KB at 775rwhp with the mild 4" pulley..Will do a pulley swap this week to a 3.75".. Heading to the track on Friday..
Here s a couple of vids of the new set up.
http://www.youtube.com/watch?v=u10jRTDMNFs Cervini hood
http://www.youtube.com/watch?v=F1zvOfC9X_k 775rwhp

great looking ride captainbob and great numbers.:wtg:Best of luck at the track!!

[captainbob]

I'm running the KB comp BAP.. Jon Lund is the only guy I trust with my tunes.. I've tried others, and Jon is one of the best.. IMHO.. My blown engine was not tune related.. I had a cylinder wall crack.. Most likely a bad cast../factory defect..
Thanks!! I'm actually putting the stripes on the hood on Thursday.. Sure would like to get into the 9's..:drool:

[captainbob]

Thanks, Jon Lund does all my tuning.. I've tried others.. Jon's tunes are the best IMO.. when I blew my engine that was not tune related.. cracked a cylinder wall..
Thanks for the warm welcome everybody:yes:

[Sssnake08]

Welcome to the site Captain:hi: