Cordless Impact Driver

[tekheavy]

Looking into getting one of these.

Has anyone used one? Likes, dislikes? How much torque can they supply? What brand would you recommend?



8175

[Tommy Gun]

Do you mean a drill/ driver or an impact wrench driver?

I have a cordless hammer drill/driver and a cordless 1/2" drive impact wrench.

Both by Milwaukee, both work great.

Only problem is I don't use them much so usually have to charge up the batteries if I think I'm going to use them.

Batteries only last a few years also.

At the time I bought them 12V was popular w/ 18V just coming out.

Now I think you can get 24V and even 28V.

[tekheavy]

Do you mean a drill/ driver or an impact wrench driver?

I have a cordless hammer drill/driver and a cordless 1/2" drive impact wrench.

Both by Milwaukee, both work great.

Only problem is I don't use them much so usually have to charge up the batteries if I think I'm going to use them.

Batteries only last a few years also.

At the time I bought them 12V was popular w/ 18V just coming out.

Now I think you can get 24V and even 28V.

Most of the searches I've done call them impact drivers not wrenches.

http://www.sears.com/shc/s/p_10153_12605_00917338000P?prdNo=1&blockNo=1&blockType=G1

http://www.sears.com/shc/s/p_10153_12605_SPM5233950301P?prdNo=9&blockNo=9&blockType=G9

[Tommy Gun]

What I have don't have ends like that.

One has a drill type collar and one is a 1/2" impact.

So no, I don't have one or use one.

[tekheavy]

What I have don't have ends like that.

One has a drill type collar and one is a 1/2" impact.

So no, I don't have one or use one.

Actually those pictures don't represent what I'm looking for. I looking for something with either a 3/8 or 1/2 end that you can put a socket on.

[BAD SNAKE]

I use an impact driver for work, metal stud framing. I prefer the Ridgid impact driver, they have a lifetime warranty. If the battery goes bad it cost 100 bucks to replace. I think the DeWalt has more power.
I have an adapter for my impact so I can use sockets.
For a carpenter, next to my hammer it's the tool I use most.
It has a belt hook that comes in handy when you need 3 hands.
The only problem is the Lithium Ion battery doesn't work or charge in very cold weather say 32 degrees.
http://www.ridgid.com/Tools/R86034K-X4-Lithium-Ion-Impact-Driver/EN/index.htm

I (http://www.ridgid.com/Tools/R86034K-X4-Lithium-Ion-Impact-Driver/EN/index.htm) hope this helps.

[tekheavy]

I use an impact driver for work, metal stud framing. I prefer the Ridgid impact driver, they have a lifetime warranty. If the battery goes bad it cost 100 bucks to replace. I think the DeWalt has more power.
I have an adapter for my impact so I can use sockets.
For a carpenter, next to my hammer it's the tool I use most.
It has a belt hook that comes in handy when you need 3 hands.
The only problem is the Lithium Ion battery doesn't work or charge in very cold weather say 32 degrees.
http://www.ridgid.com/Tools/R86034K-X4-Lithium-Ion-Impact-Driver/EN/index.htm

I (http://www.ridgid.com/Tools/R86034K-X4-Lithium-Ion-Impact-Driver/EN/index.htm) hope this helps.

Thanks BS. :tiphat:

[Gr8snkbite]

I have the two piece set....haven't used the impact yet, just the regular driver....both are sweet tho...

[Orf]

If it helps, I use this one (http://www.ryobitools.com/catalog/18v_oneplus/drills_drivers/P230).

Love it. Use it all the time. The only thing I use the cordless drill for anymore is to drill pilot holes, if needed.

[papashelby]

I have never used a battery powered impact driver/wrench, so I'll just give you my 2 cents on the brand. Ridgid and Milwaukee batteries are made by Ryobi. Porter Cable and Dewalt are also one in the same. I've only started buying Milwaukee tools (the M12 series) over the last year because of the multiple tools that can use the same battery, very nice. But, as BS has noted about the Dewalt, the Milwaukee batteries do not work well in cold weather either. I almost think it is a built in safety feature, but not sure. I have a Ridgid 18v that is used just at home (so not used much), that I have had for 8 years, and the batteries still hold a charge, although, these batteries have never been in cold weather. I have a Makita 18v that is on the work truck and has been used and abused in all weather, ie: rain, snow, sub zero, and the batteries still hold a charge and always worked, no matter what. I've owned a Ryobi, made mainly for light use imo, and is now in the trash. I also had a Craftsman, batteries lasted 2 years max, also in the trash. Never had a Porter Cable or Dewalt, but I know people that had Dewalts complained that the batteries also do not last that long. So after all this, my personal opinion, is buy a Makita if you can afford it, otherwise a Milwaukee or Ridgid. Ridgid, I think, gives you a lifetime warranty on the batteries now. My son still has my original Makita, bought back in 1989, and you can still buy a battery for it. If I were you, I'd just borrow TG's like Joe does.

[tekheavy]

Do these cordless impact drivers produce enough torque to remove lug nuts? I would think if they were put on with an air impact wrench they may have a problem getting them off.

[Orf]

Do these cordless impact drivers produce enough torque to remove lug nuts? I would think if they were put on with an air impact wrench they may have a problem getting them off.

I never tried that, but I wouldn't count on one to be able to do that.

IMO they are made to make driving screws much easier than a drill does.

[papashelby]

I never tried that, but I wouldn't count on one to be able to do that.

IMO they are made to make driving screws much easier than a drill does.

:iagree: Many times you need a breaker bar and a cheater to get lug nuts loose. Don't think a battery powered tool is going to bust them loose, but if you hang on really really tight, you'll probably go for ride like propeller blade. :grin:

[Joe G]

If you want something cheap to take off lugnuts, get something like this.

http://www.harborfreight.com/power-tools/drivers/12-electric-impact-wrench-68099.html

[BAD SNAKE]

The Dewalt, Makita and Ridgid are the most popular with the metal stud framers. The rule of thumb with the batteries is to keep one in the charger and one in the drill.
These impact drivers will drive 3" wood screw's all day long.

One other good thing about the Ridgid is it has a LED light that turns on when your using it. It might not seem like a big deal but it comes in handy in dark places.

[tekheavy]

If you want something cheap to take off lugnuts, get something like this.

http://www.harborfreight.com/power-tools/drivers/12-electric-impact-wrench-68099.html

I already have a Porter-Cable electric impact gun.

[Joe G]

I already have a Porter-Cable electric impact gun.Cool... so why do you need a battery powered one?

[HSURB]

I still use a Yankee Drill.

HSURB®

[tekheavy]

Cool... so why do you need a battery powered one?

No cord.

[Tommy Gun]

Actually those pictures don't represent what I'm looking for. I looking for something with either a 3/8 or 1/2 end that you can put a socket on.


I have a Milwaukee 1/2" Cordless Impact Wrench and a Milwaukee 1/2" Dr 115V Impact Wrench

[Tommy Gun]

My Milwaukee cordless at full charge can break loose my lug nuts.

I usually break them w/ a bar first though.

I think it is one of the only ones that can because it is rated at 450ft/lbs torque like some air impact guns.

Mine is only 12 volts which I think was replaced by this 18v gun...


http://www.northerntool.com/shop/tools/product_200400877_200400877


I would consider selling it because I don't use it much anymore.

They do still sell batteries for it.

http://www.ebay.com/itm/12V-2-0AH-Battery-MILWAUKEE-48-11-1967-48-11-1970-/160580216277?pt=US_Power_Tools_Batteries_Chargers&hash=item256353a5d5

[Tommy Gun]

My Milwaukee cordless at full charge can break loose my lug nuts.

I usually break them w/ a bar first though.

I think it is one of the only ones that can because it is rated at 450ft/lbs torque like some air impact guns.

Mine is only 12 volts which I think was replaced by this 18v gun...


http://www.northerntool.com/shop/tools/product_200400877_200400877


I would consider selling it because I don't use it much anymore.

They do still sell batteries for it.

http://www.ebay.com/itm/12V-2-0AH-Battery-MILWAUKEE-48-11-1967-48-11-1970-/160580216277?pt=US_Power_Tools_Batteries_Chargers&hash=item256353a5d5


This tool listed is tool only, no battery, no charger. I believe I paid close to $280 for the tool w/ battery and charger.

[tekheavy]

I never buy knock-off batteries anymore. They never seem to hold up as well as the originals.

That Milwaukee looks like a nice tool. And at 18 volts it should have all the power I need.

Thanks TG. :tiphat:

[Tommy Gun]

I never buy knock-off batteries anymore. They never seem to hold up as well as the originals.

That Milwaukee looks like a nice tool. And at 18 volts it should have all the power I need.

Thanks TG. :tiphat:

I bought 2 fresh one's off eBay about a year ago and they have been holding up well, but I know what you mean.

The one's direct from Milwaukee are still available.

The 18V should have plenty of power for your needs and you'll be able to get parts for years to come if you need them.

The only Milwaukee part I have ever needed (other than batteries) are cords for my heat guns.

I have used Milwaukee heat guns for 20 years and I use them every day and am hard on the cords. :nonono:

also, Northern tools and Home Depot carry many Milwaukee tools if you have them near you.

.

[Tommy Gun]

:oops: I just looked at my Cordless Impact and Drill/driver, they are both 18Volt units. :doh:

I was thinking they were 12v.

[Tommy Gun]

This is what I have, but my battery is different.


http://www.northerntool.com/shop/tools/product_200389724_200389724


.

[Tommy Gun]

http://www.youtube.com/watch?v=JTq9GCpL4mY

[Tommy Gun]

:wow2: You must be rich.


It was expensive. :nonono:


I wrote it off because I used it for work. :grin:

[tekheavy]

http://www.youtube.com/watch?v=JTq9GCpL4mY


:wtg:


That's a real nice tool you got.

[onecrazydog]

http://www.sears.com/shc/s/p_10153_12605_SPM5233950301P?prdNo=9&blockNo=9&blockType=G9

I have that Dewalt one!!

[onecrazydog]

This is what I have, but my battery is different.


http://www.northerntool.com/shop/tools/product_200389724_200389724


.

Nice,


Max. Torque (ft.-lbs.)

450

[Tommy Gun]

Definitely have to have a grip on it. Lol

[Joe G]

Definitely have to have a grip on it. LolCP won't help? :look:

[Alloy Dave]

I've never had an impact driver, but I can say I've used DeWalt tools for about 12 years and I've loved them. I think others make very good tools also, such as Makita and Porter Cable. My woodworking magazines do comparisons on many brands of woodworking tools such as sanders, screw drivers, portable planers, etc....and DeWalt and Porter Cable usually come out near the top.

The one brand I would avoid is Sears.

[68fastback]

In general I like DeWalt tools too ...I just don't like their VSR drills so much ...plenty of power but they just won't 'creep' like a Makita ...the DeWalts (all I've tried) is like a binary on/off ...you just can't apply power progressively right from *zero* rpm ...they want to jump directly to about 120 rpm or so ...which is PITA for some things.

I've never used a cordless impact driver ...they do seem very usefull tho in the TV shows ...seems everyone is using them now.

[The Bone]

Battery tools are fine but if you dont use them all the time the batteries go dead and they don't recharge very well. I have a battery drill I use sometimes and very handy to have but I have 2 batteries for it. They are starting t be difficult to charge and they dont last as long as when new. For impact tools I prefer air. I rarely use a impact tool except at home. If you go to the track then its a different story

[68fastback]

Battery tools are fine but if you dont use them all the time the batteries go dead and they don't recharge very well. I have a battery drill I use sometimes and very handy to have but I have 2 batteries for it. They are starting t be difficult to charge and they dont last as long as when new. For impact tools I prefer air. I rarely use a impact tool except at home. If you go to the track then its a different story

I know what you mean ...they're probably Nickel Cadmium (NiCad) or Nickel Metal Hydride (NiMH) batteries.

My Makita cordless drills, which are now almost 30 years old, use old NiCad technology and the batteries only last 4-5 years before they start to degrade (fortunately they're only about $30 to repalce). NiCad also develops 'memory' if not discharged fully before a recharge, so I also have two batteries and alternate charging, but they still age after several years.

NiMH doesn't have memory like NiCd but losses charge much faster while not being used and they also eventually wear out.

The new Lithium Ion batteries have no memory problems and also hold a charge while not in use for a *very* long time. They will eventually wear out too, but are quite durable.

If I ever need to replace my old professional Makitas, I'll definately go to lithium ion batteries. Most manufacturers are clearing out their NiMH batteries now by offering great package deals but for the same exact drill with Lithium ion they're charging considerably more.

With some manufacturers, like DeWalt, their new Li batteries will fit their prior drills that shipped with NiMH batteries, so you can just upgrade the batteries, however the old charger may not properly charge the new batteries even though they will fit, so that sould be upgraded as well.

I will definately not buy any new cordless tool unless it's lithium ion since I hate picking up a tool that's been sitting for 6 months and the battery is stone dead ...just hard to justify the expense of upgrading unless one fails.

[Tommy Gun]

Did Tekeroni ever buy one of these?

[tekheavy]

Did Tekeroni ever buy one of these?

Not yet. Can I borrow some money?

[tekheavy]

And don't ever call me Tekeroni again.

[Tommy Gun]

:oops:

[Joe G]

And don't ever call me Tekeroni again.

:sorry: Tekeroni.

[tekheavy]

Dead man walking.

[Joe G]

:sofa:

[Tommy Gun]

He said "not" to. :nonono:

[Joe G]

He said "not" to. :nonono::oops:


Ok.



I should NOT call him Tekeroni?

Is that right?


NO Tekeroni?





Gotcha. I'll cross out every Tekeroni I find.


Tekeroni <--- that's the first one.

[Tommy Gun]

And you wonder why people don't get along? :nonono:



lol

[Joe G]

What? :innocent:

[tekheavy]

I thought this was a tech thread? :popcorn:

[Tommy Gun]

Not yet. Can I borrow some money?


Here you go....



http://www.harborfreight.com/1-4-quarter-inch-18-volt-cordless-impact-driver-67028.html





:tiptoe:

[tekheavy]

Here you go....



http://www.harborfreight.com/1-4-quarter-inch-18-volt-cordless-impact-driver-67028.html





:tiptoe:

$27.99. :lol:

[Tommy Gun]

:rofl3:

[68fastback]

:rofl3: ...with a pink battery of unknown technology -lol.

[Alloy Dave]

I know what you mean ...they're probably Nickel Cadmium (NiCad) or Nickel Metal Hydride (NiMH) batteries.

My Makita cordless drills, which are now almost 30 years old, use old NiCad technology and the batteries only last 4-5 years before they start to degrade (fortunately they're only about $30 to repalce). NiCad also develops 'memory' if not discharged fully before a recharge, so I also have two batteries and alternate charging, but they still age after several years.

NiMH doesn't have memory like NiCd but losses charge much faster while not being used and they also eventually wear out.

The new Lithium Ion batteries have no memory problems and also hold a charge while not in use for a *very* long time. They will eventually wear out too, but are quite durable.

If I ever need to replace my old professional Makitas, I'll definately go to lithium ion batteries. Most manufacturers are clearing out their NiMH batteries now by offering great package deals but for the same exact drill with Lithium ion they're charging considerably more.

With some manufacturers, like DeWalt, their new Li batteries will fit their prior drills that shipped with NiMH batteries, so you can just upgrade the batteries, however the old charger may not properly charge the new batteries even though they will fit, so that sould be upgraded as well.

I will definately not buy any new cordless tool unless it's lithium ion since I hate picking up a tool that's been sitting for 6 months and the battery is stone dead ...just hard to justify the expense of upgrading unless one fails.I just got my new Woodshop magazine, and there is an article about Li-ion battery-powered drill drivers....not exactly what he's looking for but similar. I may be able to scan it and post it later...but I'm pretty busy and it's not at the top of my priority list at the moment.

[68fastback]

Tools of the Trade is a great construction trades magazine I get ....I just did a search to see if they have anything online and here's the online version of their drill-driver testing (http://www.toolsofthetrade.net/industry-news.asp?articleID=884891&sectionID=1490). They liked the Milwaukee best in these tests.

[tekheavy]

I'm going to put an inquiry into Heidi to find out what the stongest/longest lasting battery is. If she don't know, nobody does. :popcorn:

[Joe G]

:goodone:

[Shlbylvr]

I'm going to put an inquiry into Heidi to find out what the stongest/longest lasting battery is. If she don't know, nobody does. :popcorn:

:hey2:

It depends on the device the battery is being used in.

[Joe G]

It depends on the device the battery is being used in.:giggle:

[Tommy Gun]

:hey2:

It depends on the device the battery is being used in.


Extra large vibrator? :popcorn:

[Joe G]

:banhammer:

[68fastback]

I know what you mean ...they're probably Nickel Cadmium (NiCad) or Nickel Metal Hydride (NiMH) batteries.

My Makita cordless drills, which are now almost 30 years old, use old NiCad technology and the batteries only last 4-5 years before they start to degrade (fortunately they're only about $30 to repalce). NiCad also develops 'memory' if not discharged fully before a recharge, so I also have two batteries and alternate charging, but they still age after several years.

NiMH doesn't have memory like NiCd but losses charge much faster while not being used and they also eventually wear out.

The new Lithium Ion batteries have no memory problems and also hold a charge while not in use for a *very* long time. They will eventually wear out too, but are quite durable.

If I ever need to replace my old professional Makitas, I'll definately go to lithium ion batteries. Most manufacturers are clearing out their NiMH batteries now by offering great package deals but for the same exact drill with Lithium ion they're charging considerably more.

With some manufacturers, like DeWalt, their new Li batteries will fit their prior drills that shipped with NiMH batteries, so you can just upgrade the batteries, however the old charger may not properly charge the new batteries even though they will fit, so that sould be upgraded as well.

I will definately not buy any new cordless tool unless it's lithium ion since I hate picking up a tool that's been sitting for 6 months and the battery is stone dead ...just hard to justify the expense of upgrading unless one fails.

If I were to get a compact impact-driver (not a drill) I'd likely buy this DeWalt (http://www.amazon.com/DEWALT-DC825KA-18-Volt-Compact-Impact/dp/B000X1SQ2K/ref=br_lf_m_1000632371_1_24_s_o_p?ie=UTF8&m=ATVPDKIKX0DER&pf_rd_p=1343711862&pf_rd_s=center-2&pf_rd_t=1401&pf_rd_i=1000632371&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=139T6GDMRNX9YFE13HBC)...over $300 off (because it has the old Ni-Cad battery technology). But with 2/3 of the savings you can buy two new Lithium Ion 18V batteries and charger (http://www.amazon.com/DeWalt-DC9180-2-C-Lithium-Ion-Batteries-DC9310/dp/B000YIDD1Q/ref=sr_1_11?s=hi&ie=UTF8&qid=1327691194&sr=1-11)...and they will fit that drill driver (and all other Dewalt XRP or newer DeWalt products, I believe) ...save $100+ plus, and then sell the new [old] Ni-Cad batteries & charger for another $140-150 (easily, since used they go for $140-150 (http://www.amazon.com/gp/offer-listing/B000LQEY14/ref=dp_olp_0?ie=UTF8&redirect=true&condition=all)) to someone who presently uses those (contractors go thru them a lot). Net a great drill driver with the latest technology for half-price. :banana: Anyhow, just sharing some research and thoughts.

[tekheavy]

If I were to get a compact impact-driver (not a drill) I'd likely buy this DeWalt (http://www.amazon.com/DEWALT-DC825KA-18-Volt-Compact-Impact/dp/B000X1SQ2K/ref=br_lf_m_1000632371_1_24_s_o_p?ie=UTF8&m=ATVPDKIKX0DER&pf_rd_p=1343711862&pf_rd_s=center-2&pf_rd_t=1401&pf_rd_i=1000632371&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=139T6GDMRNX9YFE13HBC)...over $300 off (because it has the old Ni-Cad battery technology). But with 2/3 of the savings you can buy two new Lithium Ion 18V batteries and charger (http://www.amazon.com/DeWalt-DC9180-2-C-Lithium-Ion-Batteries-DC9310/dp/B000YIDD1Q/ref=sr_1_11?s=hi&ie=UTF8&qid=1327691194&sr=1-11)...and they will fit that drill driver (and all other Dewalt XRP or newer DeWalt products, I believe) ...save $100+ plus, and then sell the new [old] Ni-Cad batteries & charger for another $140-150 (easily, since used they go for $140-150 (http://www.amazon.com/gp/offer-listing/B000LQEY14/ref=dp_olp_0?ie=UTF8&redirect=true&condition=all)) to someone who presently uses those (contractors go thru them a lot). Net a great drill driver with the latest technology for half-price. :banana: Anyhow, just sharing some research and thoughts.

:logical:

[68fastback]

:uwelcome: lol.

[Tommy Gun]

You think too much.

[68fastback]

...too much what? :biggrin:

[Tommy Gun]

Thoughts

[68fastback]

:giggle:

...you post too much...

















...posts :lol:

[Tommy Gun]

:hey2:

[68fastback]

Extra large vibrator? :popcorn:

...like for concrete? :shades:

8235 :rofl2:

[tekheavy]

:backontopic:

[68fastback]

Tek, check these out...

...this is a smokin' deal on the same DeWalt as above but tool-only for $79! (http://www.amazon.com/DEWALT-Bare-Tool-DC825B-18-Volt-Cordless/dp/B002RT7K4Q) Then just buy the Li ion batts/charger separately :banana:

...or if you don't really need an impact driver, this seems like a great deal on a 1/2" DeWalt Drill-driver with two Li ions and charger (http://www.amazon.com/DEWALT-DCD760KL-18-Volt-Cordless-Lithium-Ion/dp/B002WJUFRU/ref=sr_1_2?s=hi&ie=UTF8&qid=1327718560&sr=1-2)for $192 (less than 1/2 price), ships free and charger works with Li Ion and NiCads (compatible back to 1996). :banana: ...of course it's a DeWalt, so probably doesn't 'creep' well, if that matters to you.

[Joe G]

:backontopic:Sorry Tekeroni.



:look:

[68fastback]

:spitcopy:

[Tommy Gun]

Personal attack :ban:

[Joe G]

Personal attack :ban::wasntme:

[tekheavy]

Personal attack :ban:

:iagree:

[Joe G]

:iagree::oops:

[6-Speed]

I have a Craftsman C3 cordless 19.2V 1/2" impact ... I use it all the time to remove lug nuts that are torqued to 80 lb-ft. I haven't used it on the Mustang yet but I'm confident that it will zip the lug nuts right off. The Lithium Ion battery stays charged for more than enough time to do a tire rotation. Since it is variable speed, I use it to loosely install the lug nuts too. I got a matching C3 impact driver for Christmas.

[Tommy Gun]

So you're tools match?

How sheik.







:rofl3:





:tiptoe:

[68fastback]

:boink: ;-)

[68fastback]

I have a Craftsman C3 cordless 19.2V 1/2" impact ... I use it all the time to remove lug nuts that are torqued to 80 lb-ft. I haven't used it on the Mustang yet but I'm confident that it will zip the lug nuts right off. The Lithium Ion battery stays charged for a more than enough time to do a tire rotation. Since it is variable speed, I use it to loosely install the lug nuts too. I got a matching C3 impact driver for Christmas.

I remember when you first posted up that you got that ...good to hear it's still working well, 6-speed!

[Shlbylvr]

So you're tools match?

How sheik.







:rofl3:





:tiptoe:

You mean Chic.

Sheik is
8240

[Tommy Gun]

You mean Chic.

Sheik is
8240

Whateva :rolleyes:


Lol

[Shlbylvr]

Whateva :rolleyes:


Lol
www.dictionary.com

[Tommy Gun]

:hey2:

[Joe G]

You mean Chic.

Sheik is
8240


Don't forget....

http://image.timepassagesnostalgia.com/watermarked/images62/6291condom.jpg


:lol:

[Joe G]

And....


http://www.bostonwrestling.com/Fanfest-SheikMSG.JPG

[Tommy Gun]

Nice thread :nonono:

[Joe G]

:oops:

[Tommy Gun]

:look:

[68fastback]

DeWalt's latest 20V Hammer-Drill and Drill-driver on Amazon ...awesome prices. Both below include two 3.0Ah 20V Lithium Ion batteries, 12v compatible 20V charger, adjustible brace and hard-shell case (a 1.5Ah 20V alternative also available at slightly lower price) ...all ship for free:

DEWALT (http://www.amazon.com/dp/B0052MIG7A/ref=pe_165100_22570430_pe_epc_dt1)DCD985L2 20-Volt MAX
Li-Ion Premium 3.0 Ah Hammerdrill/Driver Kit -- $260.24 (http://www.amazon.com/dp/B0052MIG7A/ref=pe_165100_22570430_pe_epc_dt1)

DEWALT DCD980L2 20-Volt MAX
Li-Ion Premium 3.0 Ah Drill Driver Kit -- $252.23 (http://www.amazon.com/dp/B0052MIGWU/ref=pe_165100_22570430_pe_epc_dt2)

Hard to beat those prices, especially since all have THREE speed ranges and adjustible looks like 20 torque settings on the clutch.

[6-Speed]

Looking into getting one of these.

Has anyone used one? Likes, dislikes? How much torque can they supply? What brand would you recommend?




8175I just used my Craftsman 19.2V C3 impact driver for the first time today assembling an IKEA shelf unit and all I can say is Wow! ... what a time and wrist saver. I already have the C3 drill and 1/2" impact wrench and bought the impact driver because Sears offered a good deal on them at Christmas time and it uses the same Li-Ion battery, but I really didn't know what I would use it for. Well the wife bought this shelf yesterday that assembles with these 4" course thread screws with 4mm Allen heads and I thought why not give the impact driver a try rather than crank them all in by hand. I went to Home Depot to buy a 1/4" drive adapter for my 4mm Allen bit and used it with the impact driver to zip those screws in effortlessly. The driver did have to start hammering to finish driving/tightening the screws, but it worked great!

[onecrazydog]

I have had my eye on the Dewalt 20V 1/2 inch impact driver with 300ftlbs of tq... Went on sale this weekend for half price so I ordered one!! All of my other cordless tools are Dewalt 20V, and I wouldn't trade them for any other brand...

http://ecx.images-amazon.com/images/I/81R857CeWiL._SL1500_.jpg

[Tommy Gun]

I'll stick w my red tools :wtg:


http://www.milwaukeetool.com

.

[JTB]

I have had my eye on the Dewalt 20V 1/2 inch impact driver with 300ftlbs of tq... Went on sale this weekend for half price so I ordered one!! All of my other cordless tools are Dewalt 20V, and I wouldn't trade them for any other brand...






You don't need that Big Boat Stace, I bought this one and use it for everything at home and at the track.


http://i404.photobucket.com/albums/pp129/JTBConsulting/Miscellaneous%20Pics/file_zps2d52f9b2.jpg~original (http://s404.photobucket.com/user/JTBConsulting/media/Miscellaneous%20Pics/file_zps2d52f9b2.jpg.html)

http://i404.photobucket.com/albums/pp129/JTBConsulting/Miscellaneous%20Pics/file_zpsf2ff8a3f.jpg~original (http://s404.photobucket.com/user/JTBConsulting/media/Miscellaneous%20Pics/file_zpsf2ff8a3f.jpg.html)

http://i404.photobucket.com/albums/pp129/JTBConsulting/Miscellaneous%20Pics/file_zps63836688.jpg~original (http://s404.photobucket.com/user/JTBConsulting/media/Miscellaneous%20Pics/file_zps63836688.jpg.html)

http://i404.photobucket.com/albums/pp129/JTBConsulting/Explorer%20Sport/file_zps8e4cd135.jpg~original (http://s404.photobucket.com/user/JTBConsulting/media/Explorer%20Sport/file_zps8e4cd135.jpg.html)

My compressor in the garage is only filling up tires and footballs these days...:smile:

[onecrazydog]

I looked at that one, wasn't sure if it would have enough power...

[JTB]

I looked at that one, wasn't sure if it would have enough power...


Neither did I, it does.

I bought from Lowes so if it was shat, I could return it...

[onecrazydog]

My 20v collection so far,

http://www.onecrazydog.com/pictures/albums/Garage/20v1.jpg

http://www.onecrazydog.com/pictures/albums/Garage/2ov2.jpg


I gave my Ryobi 18V set to my cousin...

[Tommy Gun]

:faint:

[JTB]

My 20v collection so far,



http://www.onecrazydog.com/pictures/albums/Garage/2ov2.jpg


I gave my Ryobi 18V set to my cousin...


I want to get that LIGHT!

[onecrazydog]

I want to get that LIGHT!


http://www.amazon.ca/DEWALT-DCL040-20-Volt-MAX-Flashlight/dp/B0052MILZM

[Highwayman]

http://i404.photobucket.com/albums/pp129/JTBConsulting/Explorer%20Sport/file_zps8e4cd135.jpg~original (http://s404.photobucket.com/user/JTBConsulting/media/Explorer%20Sport/file_zps8e4cd135.jpg.html)


Someone has a way too many tires and wheels for one vehicle

[Tommy Gun]

Someone has a way too many tires and wheels for one vehicle


2 months no snow, 10 months snow :giggle:

[Tommy Gun]

No radio OCD ? :grin:


I've had my Milwaukee radio over 15 years, been through lots of yard work and yard projects. :grin:


13043

.

[JTB]

2 months no snow, 10 months snow :giggle:


Don't even have any snow right now...


Damm grass is still growing. :smile:

[Tommy Gun]

:)

[Tommy Gun]

Good time to make sure the snow blower works :look:

[Gr8snkbite]

I looked at that one, wasn't sure if it would have enough power...

i have this one also...works great..plenty of power....:grin:

[Joe G]

Someone has a way too many tires and wheels for one vehicle


... but someone needs to block those rear wheels while on the jack on a sloped driveway. :nonono:

[Joe G]

I've had my Milwaukee radio over 15 years, been through lots of yard work and yard projects. :grin:


13043

.

:bsflag:



We know you don't do any yard work. :nonono:

[Tommy Gun]

Okay, yard products...

[JTB]

... but someone needs to block those rear wheels while on the jack on a sloped driveway. :nonono:

http://i404.photobucket.com/albums/pp129/JTBConsulting/Explorer%20Sport/file_zpse1ca3fa6.jpg~original (http://s404.photobucket.com/user/JTBConsulting/media/Explorer%20Sport/file_zpse1ca3fa6.jpg.html)


You should comment on things you can see and know something about, rears are blocked and so is the drivers front.

Chocks: ALWAYS


Carry on...

[onecrazydog]

You should comment on things you can see and know something about,




Where's the fun in that?

[Tommy Gun]

http://i404.photobucket.com/albums/pp129/JTBConsulting/Explorer%20Sport/file_zpse1ca3fa6.jpg~original (http://s404.photobucket.com/user/JTBConsulting/media/Explorer%20Sport/file_zpse1ca3fa6.jpg.html)


You should comment on things you can see and know something about, rears are blocked and so is the drivers front.

Chocks: ALWAYS


Carry on...

I just figured you knew better, guess that smuck Joe didn't think so. :giggle:

[JTB]

Where's the fun in that?


Lmao!

[Joe G]

http://i404.photobucket.com/albums/pp129/JTBConsulting/Explorer%20Sport/file_zpse1ca3fa6.jpg~original (http://s404.photobucket.com/user/JTBConsulting/media/Explorer%20Sport/file_zpse1ca3fa6.jpg.html)


You should comment on things you can see and know something about, rears are blocked and so is the drivers front.

Chocks: ALWAYS


Carry on...

Good to know... weren't visible.

[Joe G]

Where's the fun in that?

:biteme:

[Joe G]

I just figured you knew better, guess that smuck Joe didn't think so. :giggle:

You can :biteme: too.

[The Bone]

+
I'm getting this for Christmas You can change out the heads for 10 different tools

http://www.craftsman.com/ue/home/cordlessProdImg.0002.jpg

[6-Speed]

http://i404.photobucket.com/albums/pp129/JTBConsulting/Explorer%20Sport/file_zpse1ca3fa6.jpg~original (http://s404.photobucket.com/user/JTBConsulting/media/Explorer%20Sport/file_zpse1ca3fa6.jpg.html)


You should comment on things you can see and know something about, rears are blocked and so is the drivers front.

Chocks: ALWAYS


Carry on...I prefer cordless chocks. :boink:

[6-Speed]

I'll stick w my red tools :wtg:

.I have a few of the red M12 and M18 tools. Their Fuel line of cordless tools is awesome stuff.

[Tommy Gun]

I prefer cordless chocks. :boink:


Okay, now that's funny! :rofl3:

.

[Gr8snkbite]

6-speed.....:yay:

MC & HNY

[68fastback]

Wow!! A blast from the past -- 6-speed!! Welcome back!!

[tekheavy]

I'm still in the market for a cordless impact wrench. Probably going to go with Milwaukee since I already have Milwaukee tools which use the same battery as this one. And this particular one is a monster with great reviews. Anyone have any recent experience with one of these or other brands you may like better?

Bare Tool, no battery

https://www.amazon.com/Milwaukee-2767-20-Torque-2-Inch-Friction/dp/B077H7JP1D


Full kit with 2 batteries and charger

https://www.amazon.com/Milwaukee-Torque-Impact-Wrench-Friction/dp/B0754MTTCL/ref=sr_1_1?crid=28Z9C89ZMNUD5&dchild=1&keywords=2767-22+milwaukee+impact&qid=1612320710&s=hi&sprefix=2767-22%2Ctools%2C167&sr=1-1

[Alloy Dave]

I don't have any experience...sorry can't help. I still use pneumatic (:cave:). Milwaukee in general makes good tools from what I hear and read though.

[tekheavy]

I don't have any experience...sorry can't help. I still use pneumatic (:cave:). Milwaukee in general makes good tools from what I hear and read though.

Yeah, I also have been using pneumatic up to now, but with the power some of these cordless ones have now and the freedom of no hose and compressor, it just kinda makes sense for me.

[Alloy Dave]

Yeah, I also have been using pneumatic up to now, but with the power some of these cordless ones have now and the freedom of no hose and compressor, it just kinda makes sense for me.I agree. I'm old enough that I likely won't be working on my own cars much longer....but if I were 10 years younger I'd probably get one too.

[68fastback]

That is a beast! Have no experience with it but the specs are awesome: ...delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. :faint: ...with 2X faster removal speed. :wtg:

I really like Milwaukee's current 18v cordless tools. They really have their act together.

[Tommy Gun]

I'm still in the market for a cordless impact wrench. Probably going to go with Milwaukee since I already have Milwaukee tools which use the same battery as this one. And this particular one is a monster with great reviews. Anyone have any recent experience with one of these or other brands you may like better?

Bare Tool, no battery

https://www.amazon.com/Milwaukee-2767-20-Torque-2-Inch-Friction/dp/B077H7JP1D


Full kit with 2 batteries and charger

https://www.amazon.com/Milwaukee-Torque-Impact-Wrench-Friction/dp/B0754MTTCL/ref=sr_1_1?crid=28Z9C89ZMNUD5&dchild=1&keywords=2767-22+milwaukee+impact&qid=1612320710&s=hi&sprefix=2767-22%2Ctools%2C167&sr=1-1


I’ve had the bigger version, but 12V version of this for years. They work awesome. They sure have gotten expensive. I also have a plug in Milwaukee 1/2 impact that works awesome. Cordless I use outside usually. I use either / or in the garage.

.

[Tommy Gun]

That is a beast! Have no experience with it but the specs are awesome: ...delivering 1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque. :faint: ...with 2X faster removal speed. :wtg:

I really like Milwaukee's current 18v cordless tools. They really have their act together.


Still usually have to crack lug nuts loose, but makes the whole job quicker.


.

[tekheavy]

Just realized when I originally started this post, I was looking for a impact driver, which I have now. Like this one.

https://www.amazon.com/Milwaukee-2850-21P-Compact-Brushless-Cordless/dp/B07K7MJWJ4/ref=sr_1_3?crid=KUV7O50NJ9DE&dchild=1&keywords=milwaukee+impact+driver&qid=1612356586&sprefix=milwaukee+impact+driver%2Caps%2C666&sr=8-3

But now I am looking for an impact wrench.

[68fastback]

Just realized when I originally started this post, I was looking for a impact driver, which I have now. Like this one.

https://www.amazon.com/Milwaukee-2850-21P-Compact-Brushless-Cordless/dp/B07K7MJWJ4/ref=sr_1_3?crid=KUV7O50NJ9DE&dchild=1&keywords=milwaukee+impact+driver&qid=1612356586&sprefix=milwaukee+impact+driver%2Caps%2C666&sr=8-3

But now I am looking for an impact wrench.

Ah, okay ...I have the same one.

But you want something like this (https://www.amazon.com/Milwaukee-2767-20-Torque-2-Inch-Friction/dp/B077H7JP1D)?

Amazon says it's only 750 in# ...that's only like 72-73 ft#

But Grainger shows it as 1,400 ft# (https://www.grainger.com/product/408L69?cm_mmc=PPC:+MSN+PLA&gucid=N:N:PS:Paid:MS:CSM-2295:TVRYAD:20501231&s_kwcid=AL!2966!10!78821373774310!4582420881766878&ef_id=09ba9977a8b8110f819ef96d4edeedce:G:s&msclkid=09ba9977a8b8110f819ef96d4edeedce)

I'm thinking Grainger is correct but their prices suck -lol



Breakaway Torque1,400 ft-lb
Fastening Torque1,000 ft-lb
Free Speed1,750 RPM
Max. Torque1,000 ft-lb
Power to Weight Ratio186.7 ft-lb/lb
Impact RatedYes
Impacts per Minute2100



I use a 1/2" Porter Cable impact wrench (air) rated at about 350 ft# and it's powerful -- laughs at car lug nuts and the big flange-nuts on the tractor blades -- so I don't quite understand how a battery powered unit can be 1,400 ft# but if it is it should be able to handle most anything ...even for truck/ag work.

[tekheavy]

Ah, okay ...I have the same one.

But you want something like this (https://www.amazon.com/Milwaukee-2767-20-Torque-2-Inch-Friction/dp/B077H7JP1D)?

Amazon says it's only 750 in# ...that's only like 72-73 ft#

But Grainger shows it as 1,400 ft# (https://www.grainger.com/product/408L69?cm_mmc=PPC:+MSN+PLA&gucid=N:N:PS:Paid:MS:CSM-2295:TVRYAD:20501231&s_kwcid=AL!2966!10!78821373774310!4582420881766878&ef_id=09ba9977a8b8110f819ef96d4edeedce:G:s&msclkid=09ba9977a8b8110f819ef96d4edeedce)

I'm thinking Grainger is correct but their prices suck -lol



Breakaway Torque1,400 ft-lb
Fastening Torque1,000 ft-lb
Free Speed1,750 RPM
Max. Torque1,000 ft-lb
Power to Weight Ratio186.7 ft-lb/lb
Impact RatedYes
Impacts per Minute2100



I use a 1/2" Porter Cable impact wrench (air) rated at about 350 ft# and it's powerful -- laughs at car lug nuts and the big flange-nuts on the tractor blades -- so I don't quite understand how a battery powered unit can be 1,400 ft# but if it is it should be able to handle most anything ...even for truck/ag work.

Yeah, saw that too. Amazon has it wrong. And judging by the reviews and tests I've seen on Youtube, it's definitely the higher figures.

[68fastback]

Yeah, saw that too. Amazon has it wrong. And judging by the reviews and tests I've seen on Youtube, it's definitely the higher figures.


Yeah, has to be.

[KayBur]

Yeah, saw that too. Amazon has it wrong. And judging by the reviews and tests I've seen on Youtube, it's definitely the higher figures.

To be honest, I am more confused by the frankly overestimated figures. If the manufacturer gives the characteristics a little lower (perhaps, it depends on the load on the tool, although I will not confirm), then in the store they will be indicated the same. In general, it is better to look at the parameters on the packaging and on the case, in order to understand exactly how things are.

[68fastback]

Yeah, My Porter Cable air impact wrench will loosen 1.125" rusted nuts easily and it's only rated at around 250#ft. Hard to believe some of these battery-powered impact wrenches having 1000+#ft ratings.

That said, if I were to buy one for convenience it would probably be a Milwaukee since I have other M18 tools (and they've always made high quality corded products for decades) -- maybe the 1/2" 2767 (or 3/4" 2864) ...probably the 1/2" since I already have high-quality Porter Cable 1/2" impact deep sockets.

[Alloy Dave]

We have a store called Rural King that sells farm equipment. They have a sale for $179 for a Milwaukee M18 2 tool combo kit.

Looks like even $10 less online lol.

https://www.ruralking.com/milwaukee-m18-cordless-lithiumion-compact-driver-and-1-4-in-hex-impact-driver-combo-kit-2691-22

[tekheavy]

We have a store called Rural King that sells farm equipment. They have a sale for $179 for a Milwaukee M18 2 tool combo kit.

Looks like even $10 less online lol.

https://www.ruralking.com/milwaukee-m18-cordless-lithiumion-compact-driver-and-1-4-in-hex-impact-driver-combo-kit-2691-22

It would have been nice if the 2 tools were an impact driver and an impact wrench instead of the drill, but I can understand why they would put those 2 together.

[tekheavy]

So I got this one last week. This is the one with 1000 ft lbs forward and 1400 ft lbs in reverse. I haven't tested it yet other then removing a few lug nuts, but I gotta say it feels like an animal. I'll update the thread after I run it through it's paces.

28534 28535

[68fastback]

I got the same M18 combo with the light too on eBay for $119 (+ shipping) about 2 years ago (when the new brushless first came out). It was an open box but everything new -- I couldn't pass it up. The 2Ah batteries don't last that long but plenty for what I do given they fully charge in about 25 min.

[68fastback]

So I got this one last week. This is the one with 1000 ft lbs forward and 1400 ft lbs in reverse. I haven't tested it yet other then removing a few lug nuts, but I gotta say it feels like an animal. I'll update the thread after I run it through it's paces.

28534 28535


Awesome! :waiting: ;-)

[Tommy Gun]

Even w the crazy torque of these things I still break bolts loose w a breaker bar first and never tighten bolts hard with it. Too easy to screw threads up on things w that much torque.