T-3650 to T-56 Swap

[Cobra Drifter]

Swapped my 01's tranny to a terminator tranny (03/04). Now I need to wire it up and I figured I would just buy an 03 T56 tranny harness and be done but noooo! It doesnt plug into the 01's main wiring harness plug.

Any ideas or knowledge? It needs to be rewired so the T56 can have the reverse lockout switch supported or it will never go into reverse.

Thanks

[68fastback]

CD, I see in the T-56 service manual (http://ttcautomotive.com/English/media/pdfs_autogen/T-56_Service_Manual.pdf)there's a reverse lockout servo. I didn't see any actual electronic schematic but possibly the servo could just be wired with a switch somehow if the harness is not compatible?

[Cobra Drifter]

Thanks. Currently Im looking for my original T3650 harness. If I can find of get one then I think I can use the lockout connection from the T56 harness and add it to the 6350 harness and add the kind of manual wiring you suggest?

[Cobra Drifter]

Bought a reverse lockout pigtail. Dropped it off before the shop went on vacation. Next week I should have an update as last Friday when they closed the Cobra was up on the rack :)

[Joe G]

:pics:

[Carnut]

Just park it where you don't have to back up. :waiting2:

[Cobra Drifter]

Shop is closed for vacation. Wont be back until Tuesday. So no pics for you!

[Tommy Gun]

Just park it where you don't have to back up. :waiting2:


:rofl3:

[Cobra Drifter]

I'll park it on the dragstrip :p