K-Member

[blackshelby]

Anyone put a BMR k member or any other one in their car?
If so whats your opinion?
Noise, vibration, fit , etc

[65SC]

Anyone put a BMR k member or any other one in their car?
If so whats your opinion?
Noise, vibration, fit , etc

I have a BMR K member in the SGT, 302 stroker/3.0SC pushing 648rwhp, it's fine. No noise or vibration. I do get vibration from the 1pc ds at around 135/145mph. May try the new 2pc aluminum ds

[badboy500]

I have on the Shelby and it's a good fit and there is very little add road noise,but there is some. I also have the "A"arms from BMR.

http://i123.photobucket.com/albums/o283/BADBOYGT500/IMG_1636.jpg
http://i123.photobucket.com/albums/o283/BADBOYGT500/IMG_1635.jpg
http://i123.photobucket.com/albums/o283/BADBOYGT500/IMG_1631.jpg
http://i123.photobucket.com/albums/o283/BADBOYGT500/IMG_1629.jpg
http://i123.photobucket.com/albums/o283/BADBOYGT500/IMG_1614.jpg
http://i123.photobucket.com/albums/o283/BADBOYGT500/IMG_1619.jpg
http://i123.photobucket.com/albums/o283/BADBOYGT500/IMG_1608.jpg
http://i123.photobucket.com/albums/o283/BADBOYGT500/IMG_1606.jpg

I have more if you need.

[blackshelby]

Thanks guys!!

[Gr8snkbite]

Great job BB...you'll need to do a separate techie thread on that...

[badboy500]

Great job BB...you'll need to do a separate techie thread on that...

I did but it got locked up over on SM,.....$#@* :doh2:

[Gr8snkbite]

I did but it got locked up over on SM,.....$#@* :doh2:

Time to start over...

[68fastback]

Very nice, Dave ...cool improvised engine jack-cradle too!

[Tommy Gun]

Dave, I thought at one time you had told me it was pretty much louder and at one point you were going to take it back off?

I also see you put your mileage on your oil filter like I do :grin: I put the date also. If it gets close to 6 months, but not mileage wise, I change it as well.


On my 2002 Mustang I have the K Member/A arms and full suspension (coil overs, torque arm/panhard) and it lets a little more noise through.

.

[badboy500]

Dave, I thought at one time you had told me it was pretty much louder and at one point you were going to take it back off?

I also see you put your mileage on your oil filter like I do :grin: I put the date also. If it gets close to 6 months, but not mileage wise, I change it as well.


On my 2002 Mustang I have the K Member/A arms and full suspension (coil overs, torque arm/panhard) and it lets a little more noise through.

.
That was the old "K" and the mounts were fliped to lower the eng. The new one I installed is good. Also, I swaped out the QA1's for the D-specks to remove the road noise and clunks.
All is good now.:)
No need for the date for I change it every year or milage...lol, Have not hit 3000 miles in a year yet..:doh2:

[badboy500]

Very nice, Dave ...cool improvised engine jack-cradle too!

Thanks.
Most installers just use a chunk of wood on the pan and that can deform the pan and change the pan to pick-up tube clearance...and that is a bad thing.

The rubber pads put the load on the outside edge and the 2x4 on the outside keep the pan from bulging out and just touch the pan bolts to help split the load.Works good.

[Tommy Gun]

That was the old "K" and the mounts were fliped to lower the eng. The new one I installed is good. Also, I swaped out the QA1's for the D-specks to remove the road noise and clunks.
All is good now.:)
No need for the date for I change it every year or milage...lol, Have not hit 3000 miles in a year yet..:doh2:


I forgot you did this twice. :doh2:

[blackshelby]

Did you guys add caster/camber plates or were you still able to get the alignment into specs without it ,when the k member and a-arms were changed?

[Tommy Gun]

Anyone put a BMR k member or any other one in their car?
If so whats your opinion?
Noise, vibration, fit , etc

No, not yet.

Just in the 2002.

[Sssnake08]

No, not yet.

Just in the 2002.

:postwhore:

[Tommy Gun]

Just catching up on threads I missed. :look:

[Sssnake08]

Just catching up on threads I missed. :look:







:haha:

[Tommy Gun]

:grin: