Section Widget
Steeda Coilovers,Saleen Watts Link and more
Steeda coilovers,camber plates,sway bar & K' member braces ect...
http://i189.photobucket.com/albums/z...IMG_1671-1.jpg
mark front strut for camber plates
http://i189.photobucket.com/albums/z...s/IMG_1659.jpg
Grind out area marked
http://i189.photobucket.com/albums/z...s/IMG_1666.jpg
http://i189.photobucket.com/albums/z...s/IMG_1668.jpg
With Camber plates installed
http://i189.photobucket.com/albums/z...s/IMG_1693.jpg
After removing LCA and steering rack Mod for front LCA relocation brackets
Remove factory nut ( spot welded on)
http://i189.photobucket.com/albums/z...s/IMG_1676.jpg
http://i189.photobucket.com/albums/z...s/IMG_1677.jpg
Mark area to drill new relocation hole.
http://i189.photobucket.com/albums/z...s/IMG_1679.jpg
Weld in new brackets ( on both sides of 'K' member) and paint
http://i189.photobucket.com/albums/z...s/IMG_1686.jpg
http://i189.photobucket.com/albums/z...s/IMG_1697.jpg
Installed new X5 ball joints
http://i189.photobucket.com/albums/z...s/IMG_1683.jpg
Rienstall new front LCA with spacers in rear mount
http://i189.photobucket.com/albums/z...s/IMG_1695.jpg
Installed new Coil overs complete with Tokico D spec shocks,Steeda HD upper mounts , springs and snubber
http://i189.photobucket.com/albums/z...s/IMG_1690.jpg
Installed new Bump steer end links
http://i189.photobucket.com/albums/z...s/IMG_1694.jpg
installed new adjustable swaybar links
http://i189.photobucket.com/albums/z...s/IMG_1701.jpg
Finished off with new OEM slotted and cross drilles Rotors from Stillen.
http://i189.photobucket.com/albums/z...s/IMG_1708.jpg
In the rear ....new adjustable Tokico 'D spec shocks , Steeda adjustable spring perches and springs , Fiore LCA's with BMR relocation brackets
http://i189.photobucket.com/albums/z...s/IMG_1712.jpg
http://i189.photobucket.com/albums/z...s/IMG_1714.jpg
Saleen Watts Link with brace
http://i189.photobucket.com/albums/z...s/IMG_1614.jpg
Installed new Watts differential cover with pivot mount and arms.
http://i189.photobucket.com/albums/z...s/IMG_1618.jpg
Drivers side brace and arm mount
http://i189.photobucket.com/albums/z...s/IMG_1632.jpg
Passenger side brace and arm mount.
http://i189.photobucket.com/albums/z...s/IMG_1633.jpg
Set up car for (4) corner weights on scales to get the best balance with driver in the car and adjust coilovers to achieve that balance and rear bite.
http://i189.photobucket.com/albums/z...s/IMG_1785.jpg
Weight with 1/2 tank of gas and driver in the car.
http://i189.photobucket.com/albums/z...s/IMG_1783.jpg
Align the car after corner weight done again with driver in the car
http://i189.photobucket.com/albums/z...s/IMG_1790.jpg
http://i189.photobucket.com/albums/z...s/IMG_1791.jpg
http://i189.photobucket.com/albums/z...20Mods/IMG.jpg
Note: a special thanks Paul Sardo and crew at Sardo's Automotive for the great work to Align and balance this car.